This tutorial is an overview of how to build a small boat. Over a period of a month, in our spare time my son and myself built a 3 metre plywood boat in a one car garage. For little money and some basic tools, we ended up with a fast stable craft that you could walk to the water.
And in queensland australia, you don’t need a license and the boat doesn’t need to be registered. So the boat started life as a sketch, with some dimensions on it. I used a free CAD program called Delftship, to create the boat in 3D.
The program generates a lines plan which is a layout of all the pieces that make up the hull. with dimensions on it. The material list for the boat’s not very big a few sheets of plywood and some pine framing from the local hardware store (Bunnings).
The plywood’s scarfed together to make up the full length of the boat. I then transferred with pencil, the dimensions from the lines plans onto the plywood. Then we cutout all the pieces with the jigsaw. Once the pieces are cut, it’s really cool to see.
How quickly the boat takes shape. once you start bringing the pieces together. The shape of the hull on this is a little unusual. It was an experiment. Which, in the end didn’t really work out. But that’s OK.
It was easy to cut and modify later on. (next tutorial) The pieces that make up the shell of the hull are brought together around the frame and the transom. The flat plate at the back of the boat. The pieces are all screwed together temporarily with tangs of metal.
Blocks of wood, screws, you can even use cable ties. It doesn’t really mater putting holes in the wood because you’ll fill after with epoxy. The whole boat is glued together and finally coated with epoxy resin. It’s all done with epoxy.
Epoxy resin with a filler (cabosil) to thicken it, is used to stitch glue the wood together, in the beginning. It’s almost like spot welding in metal. Once the glue dries you can take out the screws. Once the boat’s been spot glued together and all the screws have been taken out.